Product#: 3864327

1965-72 GM; Wiring Harness Firewall Retainer Gutter; 13" Long; OER

Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...


Product#: 3779143

1961-64 Impala; Bel Air; Biscayne; Steering Column to Firewall Seal, with Automatic Transmission

Reproduction steering column floor seal for 1961-64 Impala, Bel Air and other GM full size models. Each seal is designed to replace the original and includes correct mounting points for installation. Manufactured from...


Product#: TF300249

1955-59 Truck, 1955 Car 4-Hole 1-5/8" OD Wire Harness Grommet (Large)

Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...


Product#: 3899593

1967-68 Impala, Bel Air, Biscayne, Caprice; Firewall Carpet Guard; Auto or Manual Trans; with Screws

Reproduction of the original lower steering column to firewall carpet guard designed for use on 1967-1968 Impala, Bel Air, Biscayne Chevrolet models with automatic or manual transmissions. Manufactured in injection molded ABS...


Product#: TF300192

1955-56 Chevrolet With Manual Transmission Steering Column Floor Seal

Reproduction steering column floor seal for 1955-56 Chevrolet models with manual transmission. Manufactured from plastic as original. These seals keep the front edge of the carpet in place and need periodic replacement due to...


Product#: TF300217

1957-59 Chevrolet Speedometer Cable Grommet

This grommet mounts on the firewall where the speedometer cable runs through it. Manufactured in automotive grade molded rubber. Replaces OE # 3781684. {fitment}


Product#: EN1807Z

1967-1972 Pontiac GTO, LeMans, Tempest; Grommet; Hood Tachometer Wire Harness

Reproduction grommet for the tachometer wireharness on 1967-72 Pontiac GTO, LeMans and Tempest. This grommets mounts in the firewall to protect the hood mounted tachometer. The grommet is located just above the fuse block to...


Product#: K929

1967-68 Camaro, Firebird; Cowl Firewall Seal Set; 5 Piece Set; Made in the USA

Reproduction of the original cowl firewall seals to replace the old or worn out originals on 1967-68 Camaro and Firebird models. Each seal is die-cut to exact dimensions and replaces the various gaskets on the outer firewall...


Product#: K930

1969 Camaro, Firebird; 1968-74 Nova; Cowl Firewall Seal Set; 5 Piece Set; Made in the USA

Reproduction of the original style cowl firewall seals designed for use with 1969 Camaro, Firebird, 1968-72 Chevy II Nova, 1971-74 Pontiac Ventura, 1971 Acadia, 1973-74 Buick Apollo, and 1973-74 Olds Omega models. Replace the...


Product#: TF300199

1957 Chevy Bel Air, 150, 210, Nomad; Steering Column Floor Seal; with Auto Trans & Manual Brakes

Reproduction steering column floor seal for 1955 Chevrolet models equipped with automatic transmission and manual brakes. Manufactured from plastic as original, this seal secures the front edge of the carpet in place and...


Product#: TF300200

1957 Chevrolet 150, 210, Bel Air; Steering Column Floor Seal; with Manual Trans

Reproduction steering column floor seal for 1957 Chevrolet models equipped with manual transmission. Manufactured from plastic as original, this seal secures the front edge of the carpet in place and maintains a...


Product#: 3906094

1967-69 Camaro, 1968-72 Nova; Heater Core Seal; Big Block Engine; Without AC

Correct reproduction heater core seal for 1967-69 Camaro big block, and 1968-72 Chevy II Nova big block models. Each seal is manufactured with dense foam molded as original. The part seals the unused small block heater core...


Product#: TF300218

1955-56 Chevy Bel Air, 150, 210, Nomad; Main Wire Harness & Speedometer Cable Firewall Grommet

Reproduction main wire harness and speedometer cable grommet and sleeve for 1955-56 Chevrolet Bel Air, 150, 210, and Nomad models. Manufactured in quality EPDM rubber replicating the original dimensions for longevity and a...


Product#: *R81916

1981-91 Chevrolet/GMC Truck; Fender-to-Cowl Insulator Seal Set; LH and RH Sides

Reproduction of the fender-to-cowl insulator seal set, also called the cowl-to-fender sound seal set, that seals the area behind the rear portion of the front fender, in between the fender and the cowl on both sides of the...


Product#: 16740B

1967-68 Ford Mustang, Mercury Cougar; Hood To Cowl Weatherstrip

Reproduction of the original cowl to hood seal weatherstrip that seals the back edge of the hood to the upper section of the firewall. This seal fits all 1967-68 Mustangs and Cougars. Seal comes complete with mounting...


Product#: W1027

1956-60 Bel Air, 150, 210, Nomad, Impala, Bel Air, El Camino; Firewall Wire Harness Grommet; Each

Reproduction of the original firewall wire harness grommet for use with various 1956-60 Chevy Bel Air, 150, 210, Nomad, El Camino, Impala, Biscayne, and various other models including station wagons. This grommet is...


Product#: 14022831

1981-91 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Fender-to-Cowl Insulator Seal; LH Driver Side

Reproduction of the fender-to-cowl insulator seal also called the cowl-to-fender sound seal that seals the area behind the rear portion of the front fender, in between the fender and the cowl. The seal is meant to reduce wind...


Product#: 14022832

1981-91 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Fender-to-Cowl Insulator Seal; RH Passenger Side

Reproduction of the fender-to-cowl insulator seal also called the cowl-to-fender sound seal that seals the area behind the rear portion of the front fender, in between the fender and the cowl. The seal is meant to reduce wind...


Product#: 3886686

1967-74 Upper Clutch Push Rod Boot - Various Models

This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...


Product#: 3962999

1970-81 Camaro, 1977-81 Firebird; Hood To Cowl Seal ; 3 Piece Set

Correct reproduction of the original style weatherstripping which attaches to the cowl top vent grill and seals the area between the hood and the cowl panel. This is a correct reproduction of the original seal that includes...


Product#: K8095

1965-67 Impala, Bel Air, Biscayne, Caprice; Hood To Cowl Seal Weatherstrip

High quality reproduction of the original weatherstrip seal that attaches to the front cowl panel and seals the area between the hood and windshield. This reproduction is manufactured to exact configuration allowing the seal...


Product#: 3819258

1963-64 Impala, Bel Air, Biscayne; Hood to Cowl Seal Weatherstrip Seal

Quality reproduction of the original hood to cowl weatherstrip seal that attaches to the cowl panel and seals the area between the hood and windshield. This correctly configured seal is manufactured to exact specifications...


Product#: MA9874

1967-76 Dodge/Plymouth A-Body; Hood To Cowl Seal; With Clips

Reproduction of the original hood to cowl seal weatherstrip for use on 1967-76 Mopar A-body models. This weatherstrip will help keep water and dirt out of the engine bay by sealing the area between the cowl panel and hood....


Product#: PK4

1969-70 Ford Mustang/Mercury Cougar; Body Rubber Plug Kit; 44 Pieces

One of the first areas of concern for any restoration is the weatherstripping, rubber stoppers or body plugs. Replacing the plugs around the body will help keep water or other elements out of crucial areas. Each klt contains...


Product#: CX1081

1948-54 Chevrolet, GMC Truck; Park Brake Floor Seal Boot

Reproduction emergency brake or parking brake rubber boot for 1948-54 Chevrolet and GMC trucks. Manufactured in durable EPDM rubber compound replicating the original in quality, design, and fitment. Features correct mounting...


Product#: 16740C

1969-70 Ford Mustang; Hood To Cowl Weatherstrip

Reproduction cowl to hood seal weatherstrip that seals the back edge of the hood to the upper section of the firewall. This seal fits all 1969-70 Mustangs and Cougars. Replace the old or worn out cowl to hood seal and...


Product#: 10221897

1991-96 Impala and Caprice Front Hood Weatherstrip Seal, Various Models

Reproduction of the original front hood weatherstrip seal designed for use on 1991-96 Chevrolet Caprice and 1994-96 Impala models. Each hood seal is manufactured from durable rubber in the original configuration for a perfect...


Product#: K631

1964-65 Chevelle, El Camino; Front Fender Well Splash Apron Set; RH & LH; Pair

Replace the worn or missing splash aprons on your inner fender wells with this authentic OER reproduction set. Designed and manufactured to factory specifications, these premium splash aprons restore the correct seal between...


Product#: 3148473

1966-70 Evaporator Case Drain Hose Rubber Seal - with AC

OER® reproduction of original evaporator case drain hose that attaches to the bottom portion of the evaporator core outlet case on various 1966-70 GM models originally equipped with air conditioning. Each drain hose is...


Product#: W1080

1955-60 Buick, Chevy, Olds, Pontiac; Hood to Cowl Seal; with Clips; Various Models

Reproduction of the original hood to cowl seal designed for use on various 1955-60 GM models. Includes the hood to cowl seal and installation clips. This seal will keep rain and dirt from entering your engine compartment. A...


Product#: 16740A

1965-66 Ford Mustang; Hood To Cowl Seal Weatherstrip

Reproduction cowl to hood seal weatherstrip that seals the back edge of the hood to the upper section of the firewall. This seal fits all 1965-66 Mustangs. Seal comes complete with 6 push-in clips designed to fit into the...


Product#: ME535

1970-74 Dodge/Plymouth E-Body; Hood To Cowl Seal

Reproduction of the original hood to cowl seal weatherstrip for use on 1970-74 Mopar E-body models. This weatherstrip will help keep water and dirt out of the engine bay by sealing the area between the cowl panel and hood....


Product#: 3786368

1961-79 GM; Transmission Control Cable Grommet; OER

OER® reproduction of the original GM transmission control cable grommet for all 1961-79 GM models. Designed to factory specifications in the correct configuration for a perfect fit and manufactured in rubber as original....


Product#: TF300083

1957 Chevrolet Bel Air, 150, 210, Nomad; Hood To Cowl Seal; 2 & 4 Door, Hardtop, & Convertible

Reproduction of the original hood to cowl weatherstrip seal designed to keep water, dirt, and other debris out of your engine compartment. This reproduction is manufactured in the correct configuration allowing the seal to...


Product#: 3899737

1967-68 Chevrolet; Inner Fender Air Conditioning Hose Grommet; Various Models

Reproduction of the original AC hose grommet designed for use on 1967-68 GM models. Located on the RH front fender well, this hose grommet insulates the AC hoses from the condensor to the engine compartment. Manufactured in...