Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models equipped with rear coil springs. Commonly referred to as a trailing arm, this component mounts between the rear axle housing and the center...
1960-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Rear Control Arm; LH Driver Side; EDP Coated
Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models equipped with rear coil springs. Also known as a trailing arm, this component mounts between the rear axle housing and the center crossmember to...
1960-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Rear Control Arm; RH Passenger Side; EDP Coated
Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models equipped with rear coil springs. Also known as a trailing arm, this component mounts between the rear axle housing and the center crossmember to...
New performance upper and lower rear control arms for 1978-87 Buick Regal and various 1978-88 GM G Body models. Constructed from heavy gauge square boxed steel tubing, these control arms deliver a significant strength upgrade...
Reproduction rear upper trailing arms for 1968-72 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
1978-88 Buick, Chevrolet, Olds, Pontiac A, G-Body; Rear Trailing Arm Set; Lower
Reproduction rear lower trailing arms for 1978-88 A & G-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs...
Reproduction bushing for the rear panhard rod on 1959-64 Chevrolet Impala, Bel Air, Biscayne models, and for the rear strut rod on 1959-62 Corvette. If your full size Chevrolet or Corvette model is feeling loose around...
Reproduction rear upper trailing arms for 1964-67 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
1967-69 Chevrolet, Pontiac; Rear Axle Pinion Rubber Bumper, Each
OER reproduction of the rear axle pinion bumper for 1967 Camaro/Firebird (2nd design), 1968-69 Camaro, Firebird models, and 1968-69 Chevy II / Nova models. Manufactured from quality molded rubber offering an original...
1968-72 Chevelle, Skylark, Cutlass, GTO; Control Arm; Rear Upper W/Polyurethane Bushings
Reproduction of the original rear upper control arm for use with various 1964-67 GM models including Chevelle, GTO, Cutlass. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design,...
1964-67 Chevelle, GTO, Cutlass; Rear Control Arm; Traction Control;; Pair
Reproduction of the factory installed reinforcement traction bars rear control arm tie bars. These were installed at the factory on all 4 speed manual transmission applications. They will also work for automatic transmission...
1967 Camaro; Rear End Square Traction Bar Bracket
Reproduction of the original traction bar to rear axle tube traction bar mounting bracket for the RH passenger side on 1967 Camaros with 350, 396, and Z28 302 models. The traction bar supports and attaches the rear traction...
Reproduction of the 350, L-48 Camaro traction bar installation hardware for 1967 Camaro models. This reproduction 12-piece hardware set mounts the radius rod to the rear axle housing and floor. The original style hardware...
1965-75 Corvette; Rear Control Arm Bumper
Replacing the control arm bumper can help bring the suspension back to factory original condition and keep it from bottoming out. {fitment}
1967 Camaro; OE Style Traction Bar Installation Hardware Kit; 6-Piece Kit
Reproduction Camaro traction bar installation hardware for 1967 Camaro models. This reproduction 6-piece hardware set mounts the Traction bar/Radius rod to the rear axle housing bracket and to the front anchor plate. The...
Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models equipped with rear coil springs. Commonly referred to as a trailing arm, this component mounts between the rear axle housing and the center...
1964-72 Chevelle, GTO, Cutlass; Rear Lower Control Arm; W/Polyurethane Bushings; Pair
Reproduction rear lower control arm for various 1964-72 GM models including Chevelle, GTO, Cutlass. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design, and fitment. Replace a...
Stock style upper and lower rear control arms for 1978-87 Buick Regal and various 1978-88 GM G Body models. Manufactured from heavy gauge steel and finished in durable black powdercoating, these control arms provide an...
Reproduction boxed rear lower control arm for various 1964-72 GM models including Chevelle, GTO, Cutlass. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design, and fitment....
1964-72 GM A-Body; Rear Control/Trailing Arms; Lower; With Original Style Rubber Bushings; LH and RH
Reproduction rear lower trailing arms for 1964-72 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
1978-88 Buick, Chevrolet, Olds, Pontiac A, G-Body; Rear Trailing Arm Set; Upper
Reproduction rear upper trailing arms for 1978-88 A & G-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs...
Reproduction rear upper control arm for various 1964-67 GM A-body models including Chevelle, GTO, Cutlass and El Camino. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design, and...
1968-72 Various GM Vehicles; Rear Control Arm; Traction Control; Tie Bar; Pair
Reproduction of the factory installed reinforcement traction bars rear control arm tie bars. These were installed at the factory on all 4 speed manual transmission applications. They will also work for automatic transmission...
1963-82 Corvette; Trailing Arm Front Bushing Kit
Reproduction trailing arm front bushing kit for 1963-1982 Chevrolet Corvette models. Each bushing is manufactured to correct factory specifications, providing an authentic appearance, accurate fitment, and dependable...
1967-81 Buick, Chevrolet, Oldsmobile, Pontiac; Rear Axle Pinion Bumper; Each; Various Models
Reproduction of the rear axle pinion bumper for various GM models. Manufactured from quality molded rubber, with an integrated steel bracket in the correct OE configuration, offering an original appearance and fit. This...
1967 Camaro; Traction Bar Lower Stop Bracket Hardware Kit; 5-Piece Kit
Reproduction Z/28 and L78 Camaro square traction bar installation hardware for 1967 Camaro models. This reproduction 5-piece hardware set mounts the traction bar stop bracket to the rear axle housing bracket and mounts the...
1980-96 Ford F-Series Truck, 1980-96 Bronco; Rear Axle Bumper
Reproduction rear axle bump stop for 1980-96 F-100, F-250, and F-350 as well as 1980-96 Bronco. This bumper is manufactured in durable rubber and replicates the original in fit and appearance. Rear axle bumpers are injected...
1975-82 Chevrolet Corvette; Strut Rod Bushing; 1.39"; Rubber; Each
Reproduction strut rod bushing for 1975-82 Chevrolet Corvette models. Each bushing is manufactured to original factory specifications using high quality automotive grade rubber to ensure proper fit, durability, and long...
1960-63 Chevy Pickup 2 WD; 1963-74 Chevrolet Corvette; Strut Rod Bushing; 1.20"; Each
Reproduction strut rod bushing for 1963-74 Chevrolet Corvette models. This authentic replacement is manufactured using high quality automotive grade molded rubber and matches the original 1.20" diameter design for proper fit...
Rear axle lower control arm bushing for 1964-72 Chevrolet Chevelle, El Camino, Pontiac GTO, Tempest, LeMans, Buick Skylark, Oldsmobile 442, Cutlass, and 1970-72 Chevrolet Monte Carlo models. Manufactured to factory...
1959-70 Impala, Bel Air, Biscayne, Caprice; Trailing Arm Bushing; Each
Rear trailing arm bushing for various 1959-1970 GM full size models including Impala, Bel Air, Caprice, and Biscayne. This high quality reproduction bushing is engineered to replace the worn or deteriorated original,...
1964-73 Rear Leaf Spring Bushing; 1/2" ; Each
OER reproduction of the original rear leaf spring bushing designed for use on various Ford models including 1965-73 Mustangs. Features a 1/2" inch diameter bore. 4 required per leaf spring. 8 required per vehicle. Sold...
1963-82 Chevrolet Corvette; Rear Trailing Arm Front Bushing; Each
Reproduction trailing arm front bushing for 1963-1982 Corvette models. Each bushing is engineered to replace the original exactly, delivering proper suspension movement and factory style performance. Manufactured from quality...
Reproduction rear trailing arm mount crossmember with factory style holes for connecting the LH and RH frame rails at the rear of the frame and providing a place to mount the trailing arm braces. A good way to replace a...
1959-64 Impala, Bel Air, Biscayne; Rear Lower Trailing Arm Bushing; Front of Arm; Each
Rear trailing arm rubber bushing for various 1959-1964 GM full size models including Impala, Bel Air, El Camino, Parkwood, Brookwood, and Biscayne. This high quality replacement bushing is designed to restore proper...
1959-64 Impala, Bel Air, Biscayne; Rear Control Arm Bolt Set; With Integrated Shock Mounting Studs
Reproduction of the often damaged or rusted rear control arm bolt set. Each set includes two of the special bolts, nuts, and lock washers that are required for mounting the lower eyelet of the shock absorbers to the rear...
1967-80 Camaro, Nova, Firebird; Rear Leaf Spring Front Bushing; Various Models; OER
Reproduction rear leaf spring bushing for various 1967-80 GM passenger car models. A critical yet often overlooked component when restoring rear suspension performance, this bushing installs into the forward eye of the rear...
1967-69 Camaro, Firebird, 1968-79 Nova; Rear Leaf Spring Installation Kit; Mono Leaf
OER® offers this complete rear leaf spring installation kit designed for use on various 1967-79 GM vehicles equipped with mono-leaf rear springs including 1967-1969 Camaro and Firebird models. Each leaf spring...
1967-69 Camaro, Firebird, 1962-69 Chevy II / Nova; Rear Spring Shackle Bushing; Each
Reproduction of the original rear spring shackle bushing designed for use on various 1967-69 GM models. Manufactured is quality EPDM hard rubber replicating the factory original in quality and ftment. Replace your cracked,...
1955-57 Chevrolet Rear Axle Bumper, Each
Reproduction of the original rear axle bumper designed for use on 1955-57 Chevrolet car models. Manufactured from molded rubber to factory specifications for originality. Mounts on the axle housing. Sold individually. 2...
1965-73 Mustang; Rear Leaf Spring Bushing Set; 1/2" OEM Style; 8 Bushing Set
Rear leaf spring bushing set for various Ford models including 1965-73 Mustangs. Features a 1/2" inch diameter bore. Each bushing is manufactured to exact factory specifications and produced in original rubber compound. Sold...