1961-68 GM Car; Various Models; Fuel Tank to Filler Neck Hose; 1-7/8 ID x 3 Long
Reproduction fuel tank to filler hose that seals the inlet filler neck to the tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...
1968-72 Buick Skylark; Fuel Line Retaining Clips; 1/4" to 3/8" lines; 3 Piece Set
Reproduction fuel line retaining clip for 1/4" to 3/8" fuel lines for 1968-72 Buick Skylark models. This application uses 3 of these special clips per car. These are used on the driver side frame to hold lines in place. Sold...
1956-62 GM; Fuel Tank Filler Hose; 2" ID x 4-7/16" Length
Reproduction fuel tank filler hose for 1957 models. Hose is specifically engineered to stand up to gasoline, fuel oil, and other petroleum-based products. Clamps sold seperately. Measures 4-7/16" in length, inside diameter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
1973-78 Chevrolet, GMC C/K Fleetside Truck; Vent Pipe Upper Hose; 5/8" I.D.
Reproduction vent pipe hose for 1973-78 Chevrolet and GMC C/K fleetside trucks. Measures 5/8" inside diameter, made of rubber, and fits on the LH side on 1973-78 models and the RH side on 1973-76 models. Replaces OE #'s...
1973-76 Chevrolet, GMC Stepside Truck; Fuel Filler Hose; RH Passenger Side
Reproduction fuel filler hose for 1973-76 Chevrolet and GMC Stepside truck models with RH side filler location. Each hose is manufactured to correct factory dimensions and replaces the old or corroded original hose. For use...
1975-78 Chevrolet, GMC C/K Fleetside; Vent Pipe Hose; Auxiliary Tank; Upper, RH
Reproduction vent pipe hose for 1975-78 Chevrolet and GMC C/K fleetside trucks. Made of rubber, and fits on the RH side on 1975-78 models with auxiliary tank. Replaces OE # 359871. Fitment Notes: 1975-1978 RH Side Aux Tank...
1966 Oldsmobile Cutlass, 442; Tri-Power; Fuel Filter; Bracket
This is a stamped steel replacement of the OEM bracket that holds the fuel filter on a 1966 Oldsmobile Cutlass with Tri-Power setup. This is a raw metal bracket that has the proper slot and configuration for easy installation...
1982-87 Chevrolet, GMC Fleetside Pickup Truck; Fuel Filler Hose; RH Passenger Side
Reproduction fuel filler hose for 1982-87 Chevrolet and GMC Fleetside truck models. Each hose is manufactured to correct factory dimensions and replaces the old or corroded original hose. Replaces OE # 14041215. For use on RH...
1960-65 Fairlane, Falcon, Comet; Fuel Tank Filler Rubber Hose; Nitrile; 70 Shore
Replacement fuel tank /gas filler hose for various Ford models. Seals inlet filler neck to tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with...
1979-89 Chevrolet, GMC Fleetside Pickup; Fuel Tank Vent Pipe Hose; Upper
Reproduction vent pipe hose for 1979-86 Chevrolet and GMC C/K fleetside trucks and 1987-89 R/V fleetside trucks. Made of rubber, and fits on the RH side on 1979-80 fleetside models and LH side on 1981-87 Shortbed models with...
1968-81 Corvette; Fuel Pump Return Hose
Replacement return hose for 1968-81 Corvette models. This 1/4" hose goes between the fuel pump and the tank.
Reproduction clips used to mount the fuel line to the frame. Includes six 3/8" clips. Applications: 1967-69 Chevrolet Camaro - Big Block 1967-69 Chevrolet Camaro - Small Block w/4bbl 1965-86 Chevrolet/GMC Truck 1965-70...
1967-68 Camaro/Firebird; Fuel Filler Neck to Tank Clamp
OER® reproduction fuel tank to neck clamp for 1967-68 Camaro & Firebird models. This clamp is manufactured to factory specifications and designed to hold the gas tank filler neck to the trunk floor. {fitment}
1968-71 Dodge Plymouth; Fuel Filter, Vapor Separator; with 426, 440
Help prevent vapor lock the way the factory intended by installing the correct fuel filter/vapor separator on your 426 Hemi or 440 ci equipped vehicle. This part mounts near the fuel pump and is designed to filter the fuel...
1979-81 Chevrolet, GMC Fleetside Truck; Fuel Filler Hose
Reproduction fuel filler hose for 1979-81 Chevrolet and GMC Fleetside truck models. Each hose is manufactured to correct factory dimensions and replaces the old cracked, or hardened original hose. Replaces OE # 14000286....
1981-91 Chevrolet, GMC Truck; Fuel Tank Vent Pipe Hose; Upper
Reproduction fuel tank vent hose for 1981-91 Chevrolet and GMC Fleetside pickup truck models. For various applications, as listed below. Replaces OE # 14036751. Chevrolet Applications: 1981-1986 Chevrolet C/K Pickup Truck;...
1981-87 Chevrolet, GMC C/K, R/V; Fuel Tank Vent Pipe Hose; Upper
Reproduction vent pipe hose for 1981-86 Chevrolet and GMC C/K fleetside trucks and 1987 R/V fleetside trucks. Made of rubber, and fits on the RH side on 1/2 ton long bed models with 16 Gallon tank. Replaces OE #'s 14036750....
1969-70 Impala/Full Size; Fuel Tank Filler Neck Hose; With Clamps; 2" ID x 5-1/2" Length
Reproduction fuel tank filler neck hose for 1969-70 full size Chevrolet cars including Impala, Bel Air, Biscayne and Caprice models (except wagon). This hose joins the fuel tank with the filler neck. Hose is specifically...
1959-66 Various Pontiac Models Includsing Bonneville, Catalina; Tri-Power; Fuel Filter; GF-61-P
New factory GF61-P inline fuel filter used with tri-power and other GM products. Has a 3/8" line. It is OEM factory blue. Fits 1964-66 GTO & 1959-66 Pontiac Bonneville and Catalina. {specs} {fitment}
1970-81 Corvette; Fuel Pump Main Feed to Tank Line Hose
Replacement fuel pump main feed to tank line hose for 1970-81 Corvette models. Molded to the correct configuration for an original fit and authentic appearance. {fitment}
1963-82 Corvette; Fuel Filler Neck Overflow Drain Hose 35" x 3/8" i.d
Replacement fuel filler neck overflow drain hose for 1963-82 Corvette models. {fitment}
1969-81 Fuel and Brake Line Clip ; Dual Line 3/8" and 1/4"
Correct clip for attaching fuel and brake lines to the frame on various GM models. This clip is made of galvanized steel and is designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is...
1973-74 Chevrolet, GMC Truck Fleetside; Fuel Filler Hose
Reproduction fuel filler hose for 1973-74 Chevrolet and GMC Fleetside truck models. Each hose is manufactured to correct dimensions and replaces the cracked or hardened original hose. The dimensions are: 13" long x 1" wide x...
1977-91 Chevrolet, GMC Blazer, Jimmy, Suburban; Fuel Tank Vent Hose; 5/8" ID x 18" Long
5/8" ID x 18" long fuel tank vent hose for 1977-91 Chevrolet and GMC Blazer, Jimmy, and Suburban models with late style 5/8" diameter vent tube. {fitment}
1969-70 Impala/Full Size; Hose; For Fuel Tank Filler Neck; Nitrile 70 Shore; 2" ID x 5-1/2" Length
Reproduction fuel tank filler neck hose for 1969-70 full size Chevrolet cars including Impala, Bel Air, Biscayne, and Caprice models except wagon. This hose joins the fuel tank with the filler neck. Nitrile hose is...
1942-86 GM; Fuel Sending Unit Filter Strainer; for 3/8" Pickup Tube
Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....
Fuel Sending Unit Filter Strainer; For 5/16" Pickup Tube
Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging or...
Fuel and Brake Line Clip Set ; Dual Line 3/8" and 1/4" ; 7 Piece Set
Correct clip for attaching fuel and brake lines to the frame on various GM models. This clip is made of galvanized steel and is designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is...
1966-67 Charger, Coronet, GTX, Belvedere; Fuel Filler Elbow Kit; with Clamps
Reproduction of the original rubber fuel filler elbow designed for use with 1966-67 Dodge and Plymouth B-Body models. This elbow clamps in place between the outer filler tube and the gas tank filler tube. Includes 2" i.d....
1967-72 GM; Brake or Return Fuel Line Clip; Under Body; R-Profile; 3/16"; Each
Reproduction of the original under body brake and fuel line clip for various 1967-72 GM models. This clip secures the brake and fuel line to the under body to keep the brake and fuel lines out of harm's way. This is a 3/16"...
1982-87 Chevrolet, GMC Fleetside Truck; Fuel Filler Hose; LH Driver Side
Reproduction fuel filler hose for 1982-87 Chevrolet and GMC Fleetside truck models equipped with 20 gallon tank on driver side. Each hose is manufactured to correct factory dimensions and replaces the old cracked or hardened...
5/16-18 X 9/16" Self-Tapping Bolt. Brake and fuel line bolts with correct Anchor head marking. Self tapping, non pointed 1/2" bolt. Set of 6. {fitment}