1964-66 Ford Mustang; Tail Lamp Panel; EDP Coated
Reproduction of the original taillight panel for use with 1964 1/2-1966 Mustangs. Each panel is manufactured in heavy gauge stamped steel as original featuring correct mounting points and pre-drilled for trunk lock...
1978-81 Camaro; Rear Body Panel Extension
Add a performance appearance to your 1978-81 Camaro with this one piece wrap-around rear body panel extension for 1978-81 Chevrolet Camaro models. This item is manufactured in quality, automotive-grade urethane material that...
1974-78 Pontiac Firebird; Rear Body Panel; EDP Coated
Reproduction of the original rear body panel designed for use with 1974-78 Pontiac Firebird models. Manufactured in quality stamped steel to the original factory dimensions for an authentic appearance and fit. Features all...
1967 Mustang; Tail Lamp Panel; Eleanor Style; For Sequential Cougar Tail Lamps
This tail lamp panel is used with sequential or Eleanor style (1967 Cougar) tail lamps on 1967 Mustangs. Will fit any 1967 Mustang as long as the correct Shelby style tail lamps are used. Each rear tail panel is produced in...
1970-71 Plymouth Barracuda, Cuda; Rear Tail Lamp Panel; EDP Coated
Reproduction of the original rear tail lamp panel for use with 1970-71 Plymouth Barracuda and Cuda models. Each panel is manufactured in quality stamped steel to correct factory specifications featuring correct contours...
1966 Impala. Bel Air, Biscayne, Caprice; Rear Lower Tail Panel; 4 Piece Set
Reproduction rear tail lamp panel for 1966 Impala and Full Size models. Replace the original rusty rear tail panel on your 1966 Chevrolet Impala, Bel Air, Biscayne, or Caprice models with the all steel reproduction. This...
1967 Tempest, Lemans, GTO; Tail Panel
Reproduction rear tail lamp panel for 1967 Tempest, Lemans, GTO models. Manufactured in quality stamped steel to correct factory dimensions. Features correct openings for tail light assembly. Comes finished in black EDP...
1962-64 Chevy II, Nova; Rear Tail Panel
Reproduction rear tail panel for 1962-64 Chevy II Nova models. Manufactured in quality stamped steel replicating the original configuration and design. Features correct mounting points and pre-drilled holes where required....
1966-67 Chevelle, Malibu; 2-Door Hardtop; Package Tray Panel; Steel
Reproduction package tray panel for 1966-67 Chevelle and Malibu 2-door hardtop models. Manufactured from quality stamped steel to factory specifications, this panel is located beneath the rear window and forms the base for...
1970-73 Firebird, Trans Am; Rear Outer Tail Panel; Plastic
Reproduction of the rear outer tail finish panel for 1970-73 Pontiac Firebird models. Quit spending time searching through salvage and wrecking yards hunting after this hard to find tail panel. Restore your Firebird or Trans...
1971-72 Monte Carlo; 2-Door Hardtop; Package Tray Panel; Steel
Reproduction package tray panel for 1971-72 Monte Carlo 2-door hardtop models. Manufactured from quality stamped steel to factory specifications, this panel is located beneath the rear window and forms the base for the rear...
1965 Impala, Bel Air, Biscayne; Rear Tail Panel; EDP Coated
Reproduction of the original rear tail panel for 1965 Impala, Bel Air, and Biscayne models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance...
1967 Camaro, Firebird Coupe; Rear Seat Speaker Shelf Panel; Package Tray Assembly; EDP Coated
Reproduction of the complete rear seat speaker shelf panel for 1967 Camaro and Firebird models. Each rear speaker shelf panel is manufactured in stamped steel to original factory specifications featuring correct contours for...
1969 Mustang Tail Lamp Panel (w/o Shelby)
Reproduction of the original 1969 Mustang taillight panel produced in heavy gauge stamped steel and finished in EDP coating. It mounts between the quarter panels at the rear of the car and provides a secure mounting point for...
1970-71 Pontiac GTO; Rear Valance Panel; Dual Cutouts For Exhaust
Replacement rear valance panel wirth dual cutouts for the exhaust pipes. This panel is made from steel. This panel fits 1970-71 GTO models. It can be used on 1972 GTO if the is run to exit the rear. {specs} {fitment}
1968 Dodge Charger; Rear Valance Panel; w/o Lamp Holes; EDP Coated
Reproduction of the original rear valance panel designed for use with 1968 Dodge Charger models. Each valance panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...
1967-68 Camaro; Rally Sport; Rear Body Panel; Premium Quality
Reproduction rear body panel for 1967-68 Chevrolet Camaro Rally Sport models. Manufactured from premium quality tooling to provide clean lines and an authentic appearance. Features correct contours, tail lamp mounting...
1964 Impala, Bel Air, Biscayne; Rear Tail Panel; EDP Coated
Reproduction of the original rear til panel designed for use with 1964 Chevrolet Impala, Bel Air, and Biscayne models. Each tail panel is manufactured in stamped steel to original factory specifications featuring correct...
1974-81 Camaro, Firebird; Rear Cross Rail
Reproduction inner rear valance panel known as the rear cross rail which is a metal panel that inserts behind the rear body panel. This panel acts as a support for the rear outer body panel and mates directly behind it. Each...
1962 Impala, Bel Air, Biscayne; Rear Tail Panel; EDP Coated
Reproduction of the original rear tail panel for 1962 Impala, Bel Air, and Biscayne models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance...
1968-69 Tempest, Lemans, GTO; Tail Panel; Modify For 1969 Models
Reproduction rear tail panel extension for 1968 Tempest, Lemans, and GTO models. Can be modified to fit 1969 models. Each rear tail panel extension is manufactured in stamped steel to original factory specifications featuring...
1967 Chevelle, Malibu; Rear Tail Lamp Body Panel
Reproduction rear tail lamp panel for 1967 Chevelle, Malibu models. Manufactured in quality stamped steel to correct factory dimensions. Features correct openings for tail light assembly. Comes finished in black EDP coating...
1970-72 Chevelle; Malibu; Tail Panel; Rear Lower; Replaces GM# 9861449
Reproduction rear body panel for 1970-72 Chevelle and Malibu models. Each rear panel is manufactured in quality stamped steel to factory specifications featuring correct contours for an authentic appearance and fit. Features...
1973-87 Chevrolet, GMC Pickup Truck; Fleetside; Rear Tail Pan; Complete
Reproduction rear tail panel for 1967-87 Chevrolet and GMC Fleetside Pickup trucks with steel bed floor. Replaces rusted or damaged panel completely. Manufactured in stamped steel. Features and Benefits: Direct replacement...
1968-72 Chevy II / Nova; Rear Upper Deck Lid Filler Panel; Silver Weld-Thru Coating
Reproduction of the original upper rear outer body panel for 1968-72 Chevy II and Nova models. Each body panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
1978-81 Camaro; Inner Rear Body Panel; EDP Coated
Reproduction of the original inner rear body panel designed for use with 1978-81 Camaro models. Each panel completely replaces the original panel in every detail. Each panel is manufactured in stamped steel to original...
1968-72 Chevy II Nova; Rear Upper Trunk Lid Filler Panel; EDP Coating
Reproduction rear outer body panel for 1968-72 Chevy II Nova models. Manufactured in quality stamped steel to OE configuration. Also known as the deck lid filler panel, this panel installs between the rear window and the rear...
1969-72 Chevy Blazer, GMC Jimmy; Rocker Box Reinforcement Panel; RH Passenger Side; EDP Coated
Reproduction of the original rear rocker box reinforcement panel for 1969-72 Blazer and Jimmy models. Each rocker box reinforcement panel is manufactured in stamped steel to original factory specifications featuring correct...
1969-72 Chevy Blazer, GMC Jimmy; Rocker Box Reinforcement Panel; LH Drivers Side; EDP Coated
Reproduction of the original rear rocker box reinforcement panel for 1969-72 Blazer and Jimmy models. Each rocker box reinforcement panel is manufactured in stamped steel to original factory specifications featuring correct...
1967-68 Camaro, Firebird; Rear Inner Valance Crossrail Panel; EDP Coated
Reproduction inner sheet metal extension for 1967-68 Camaro and Firebird models. Each rear inner crossrail panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
1971-73 Mustang; Tail Lamp Panel; EDP Coated
Reproduction of the original style tail light panel for use with 1971-73 Ford Mustang models. Each tail light panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...
1973-79 Ford Styleside Pickup Truck; Rear Tail Pan Assembly
Reproduction pickup bed rear tail pan assembly for 1973-79 Ford F-series styleside pickup trucks. Located at rear of the bed, this is the heavy rear cross sill brace that finishes off the very back end of the bed behind the...
1970-73 Camaro, Firebird; Rear Frame Crossmember; EDP Coated
Reproduction of the inner frame crossmember for use with 1970-73 Camaro and Firebird models. This reproduction also known as the rear crossrail, is the stamped steel panel that inserts directly behind the rear body panel and...
1968-70 Dodge Charger; Rear Lower Corner Panel; RH Passenger Side
This reproduction rear lower corner panel is installed between the quarter panel and the rear lower valence panel. Features correct gauge sheet metal and a black electrophoretically deposited coating (EDP, or E-coat) for...
1970-72 PontiacLeMans, 1972 GTO; Rear Valance Panel
Reproduction new OEM replacement rear valance for 1970-72 Pontiac LeMans and 72 GTO models. It is made of ABS plastic like the OEM will never rust and is ding proof. All mounting tabs are there for installation. Sold...
1968-72 Chevelle, Malibu; Convertible; Rear Window to Trunk Panel; Replaces GM# 7672166
Reproduction below rear window panel for 1968-72 Chevrolet Chevelle convertible models. Manufactured in stamped steel to factory specifications, this panel replicates the original design for proper fit, alignment, and OE...
1967-68 Ford Mustang; Tail Lamp Panel; No Trunk Corners
Reproduction taillight panel manufactured using heavy gauge stamped steel. Mounts between the quarter panels at the rear of the car and provides a secure mounting point for the taillights and fuel filler pipe. Fits 1967-68...
1967-72 Chevrolet, GMC Suburban Truck; Rear Corner Tail Lamp Repair Panel; RH
Replacement style repair panel for rear corner tail lamp on 1967-72 Chevrolet and GMC Suburban models. Each tail lamp panel is manufactured in quality stamped steel that replicates the original contours and design. Will...
1969-70 Ford Mustang; GT; Rear Lower Valance Panel; With Rear Exhaust
This quality reproduction rear lower valance panel features authentic contours, appearance and original mounting points. Includes appropriate cutouts for back up lamps, dual exhaust (GT models), and original style license...
1964-65 Chevelle; Below Rear Window Panel; 2-Door Hardtop Models
Reproduction below rear window panel for 1964-65 Chevrolet Chevelle 2-door hardtop models. Manufactured in stamped steel to factory specifications, this panel replicates the original design for proper fit, alignment, and OE...
1966-67 Chevelle, Malibu; Package Tray Support Panel; 2-Door Hardtop Models; LH
Reproduction LH package tray support panel for 1966-1967 Chevelle and Malibu 2-door hardtop models. Manufactured in stamped steel to factory specifications, this panel installs in the package tray area to restore original...
1966-67 Chevelle, Malibu; Package Tray Support Panel; 2-Door Hardtop Models; RH
Reproduction RH package tray support panel for 1966-1967 Chevelle and Malibu 2-door hardtop models. Manufactured in stamped steel to factory specifications, this panel installs in the package tray area to restore original...
1970-73 Camaro; Rear Lower Valance Panel; EDP Coated
Reproduction of the original rear valance panel designed for use with 1970-73 Chevrolet Camaro models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
1969-70 Ford Mustang; Rear Lower Valance Panel; Standard
This quality reproduction rear lower valance features authentic contours, appearance and original mounting points. Includes appropriate cutouts for back up lamps and original style license plate mount. This part fits: 1969 -...
1971-72 Chevelle, Rear Valance Panel; All Models Except Station Wagon
Reproduction rear valance panel for 1971-72 Chevrolet Chevelle and Malibu models except station wagon. Manufactured to factory specifications, this panel installs below the rear bumper and serves as a finishing panel between...
1968-72 Chevelle, 1971-72 Monte Carlo; Package Tray Support Panel; 2-Door Hardtop Models; LH
Reproduction LH package tray support panel for 1968-1972 Chevelle and 1971-1972 Monte Carlo 2-door hardtop models. Manufactured from quality stamped steel to factory specifications, this panel installs in the package tray...
1968-72 Chevelle, 1971-72 Monte Carlo; Package Tray Support Panel; 2-Door Hardtop Models; RH
Reproduction RH package tray support panel for 1968-1972 Chevelle and 1971-1972 Monte Carlo 2-door hardtop models. Manufactured from quality stamped steel to factory specifications, this panel installs in the package tray...
1964-66 Mustang; Rear Deck Filler Panel; Coupe; EDP Coated
Reproduction of the original rear deck filler panel designed for use with 1964-66 Mustang coupe models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...
1969 Camaro, Firebird; Rear Inner Valance Panel; with Silver Weld-Thru Coating
Reproduction of the original rear inner valance panel for use with 1969 Camaro and Firebird models. Each rear inner valance panel is manufactured in stamped steel to original factory specifications featuring correct contours...
1970 Chevelle; Malibu; Valance Panel; Rear Lower; Replaces GM# 3962322
Reproduction rear lower valance panel for 1970 Chevelle and Malibu models. Each rear panel is manufactured in quality stamped steel to factory specifications featuring correct contours for an authentic appearance and fit....
1965-66 Ford Mustang; GT; Rear Lower Valance Panel; Without Back-Up Lamp Holes; EDP Coated
Quality reproduction of the original rear lower valance panel designed for use with 1965-66 Mustang GT models. Each valance panel is manufactured in stamped steel to original factory specifications featuring authentic...
1973-91 Chevrolet, GMC Suburban; Tail Panel Skin; For Models With Cargo Doors
Reproduction tail panel skin for 1973-91 Chevrolet and GMC Suburban models with cargo doors. Manufactured in stamped steel to OE specifications replicating the original tail panel skin. Replace your rusted or damaged original...
1964-66 Mustang; Tail Lamp Panel Brace; Coupe, 2+2
Reproduction of the original tail lamp panel brace designed for use with 1964-66 Ford Mustang coupe and 1965-66 2+2 fastback models. Each brace is manufactured in stamped steel to original factory specifications featuring...
1964-66 Mustang; Tail Lamp Panel Brace; Convertible; EDP Coated
Reproduction of the original tail lamp panel brace designed for use with 1964-66 Ford Mustang convertible models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours for...
1970 Dodge Challenger; Rear Tail Lamp Panel; EDP Coated
Reproduction of the original rear tail lamp panel for use with 1970 Dodge Challenger and Cuda models. Each panel is manufactured in quality stamped steel to correct factory specifications featuring correct contours...
1965 Tempest, Lemans, GTO; Tail Light Panel
Reproduction rear steel trunk body panel. This is the rear panel that tail lamp housing and rear chrome tail panel attached to. It attaches to both quarter panels and trunk floor. Fits: 1965 GTO, Lemans, Tempest.{fitment}
1982-84 Camaro; Rear Body Panel Extension; 2 Piece Design
Add a racing look to the rear profile of your third-gen Camaro with this premium 2-piece rear body panel extension, specifically engineered for 1982?1984 models. This extension delivers the fit and detail offering an upgraded...
1965 Chevelle, Malibu; Rear Tail Panel Assembly
Reproduction rear tail panel for 1965 Chevelle and Malibu models except wagon. Manufactured in quality stamped steel replicating the original configuration and design. Features correct mounting points and pre-drilled holes...
1968 Mustang; Tail Lamp Panel; California Special; Stamped Steel; EDP Coated
This is a steel replacement tail lamp panel made specifically for 1968 Mustang running sequential Shelby style (1965 Thunderbird) tail lamps. Will fit any 1968 Mustang as long as the correct Shelby style tail lamps are used....
1969 Pontiac Firebird; Rear Body Panel; EDP Coated
Reproduction of the original rear tail lamp panel designed for use with 1969 Pontiac Firebird and Trans Am models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for...