1968-79 Camaro, Chevelle, Impala, Nova, Ventura; Rear License Plate Bracket; with Hinge; EDP Coated
Reproduction rear license plate bracket designed for various 1968-79 GM models. This authentic OE-style bracket is manufactured from quality stamped steel and includes a spring-loaded hinged door that allows access to the...
1970-73 Chevy Camaro; RS Front License Plate Bracket; with Rally Sport Front End
Reproduction of the original front license plate bracket designed for use on 1970-73 Camaro Rally Sport (RS) models (with split front bumper). This bracket is manufactured in stamped steel and features an EDP coating for rust...
Reproduction license plate rubber bumpers for various GM models including 1967-68 Camaro front or rear. Each bumper replicates the original in fit and appearance. Will replace the original worn out or missing original rubber...
1978-87 El Camino, Caballero, Rear License Plate Pocket; Chrome/Black
Reproduction rear license plate pocket for 1978-87 El Camino and Caballero models. Manufactured in injection-molded ABS and finished in chrome with black accents, this pocket is designed to factory specifications for a...
1967-91 Chevy, GMC Pickup, Blazer, Suburban; Bracket; License Plate; Rear; Chrome Plated
Reproduction stamped steel license plate bracket for 1967-86 Chevrolet/GMC C/K-Series, and 1987-91 R/V-Series Pickup, Blazer/Jimmy, Suburban, and 1973-87 G-Series Van. Each bracket is designed to replace the OE rear license...
1967-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Rear License Plate Bracket; EDP Coated
Reproduction stamped steel license plate bracket for 1967-86 Chevrolet/GMC C/K-Series, and 1987-91 R/V-Series Pickup, Blazer/Jimmy, Suburban, and 1973-87 G-Series Van. Each bracket is designed to replace the OE rear license...
1982-92 Camaro; License Plate Bracket; Rear
Reproduction rear license plate bracket for 1982-92 Camaro models. This stamped steel panel will replace your damaged or rusted bracket to return your Camaro back to its original factory condition. This spring loaded bracket...
1966-1977 Ford Bronco License Plate Bracket, Stainless Steel
Reproduction stamped stainless steel license plate bracket for 1966-77 Bronco models. These brackets often get bent or lost over time. Bracket attaches on the lefthand side of the vehicle in the recessed area of the tailgate....
1971?73 Buick & Oldsmobile License Plate Bracket; except Station Wagon Models
Upgrade your restoration or replace a damaged original with this high-quality reproduction license plate bracket, designed specifically for 1971?1973 Buick and Oldsmobile models, excluding station wagons. Manufactured to...
1964-68 Chevelle, Malibu, Tempest, Lemans, GTO; License Plate Bracket; Gas Door; Rear
License plate bracket for 1964-68 Chevrolet and Pontiac A-Body models, including Chevelle, Malibu, Tempest, Lemans, and GTO. Manufactured in stamped steel and includes the spring that allows you to flip it open for access to...
1981-88 Oldsmobile Cutlass, Cutlass Supreme; Plate; Front License Plate Delete; Polished Stainless
Front license plate bracket delete stainless steel plate for 1981-88 Oldmobile Cutlass models. This plate covers the mounting area on the front bumper where the front license braket would mount. It is made of polished...
1981-87 Buick Regal; Front License Plate Bracket; Polished Chrome
Reproduction front bumper license plate bracket for 1981-1987 Buick Regal, Grand National, Type T, GNX, and Limited models. Each bracket is manufactured to correct factory specifications for an authentic appearance and...
1974-75 Firebird; Front License Plate Support Brackets; Pair
Reproduction of the original front license plate support brackets designed for use with 1974-75 Pontiac Firebird, Trans Am, Formula, 400 models. Each bracket is manufactured in stamped steel replicating the original in...
1979-81 Firebird, Trans Am; Rear License Plate Bracket
Correct reproduction rear license plate bracket for 1979-81 Pontiac Firebird and Trans Am and a variety of other GM models. Each bracket is manufactured in stamped steel to the original configuration featuring correct...
1969 Pontiac Firebird; License Plate/Fuel Door; Extension Bracket
Rear license plate and fuel door extension bracket for 1969 Pontiac Firebird models. This is the bracket that the rear license plate bracket mounts to. {specs} {fitment}
1988-2002 Chevy, GMC Truck; Front License Plate Bracket; without Bumper Impact Strip
Reproduction front license plate bracket for 1988-2002 Chevrolet and GMC C/K pickup truck models, and 1992-99 Tahoe/Yukon and Suburban models. Each license plate bracket is designed and manufactured to replace the original...
1971-72 Mustang; Front License Plate Mounting Bracket; EDP Coated
Reproduction of the original front license plate bracket to mount a license plate to the front valance on 1971-72 Mustang. For use with a standard bumper, each bracket is produced in stamped steel and finished in EDP coating...
1967-68 Camaro; Front License Plate Bracket; Black; EDP Coated;
Reproduction of the original license plate bracket designed for use with 1967-68 Chevrolet Camaro models. Each bracket is manufactured in quality stamped steel, precisely replicating the original in design, fitment, and...
1969 Camaro; Front License Plate Bracket; EDP Coated
Reproduction of the original license plate bracket designed for use on 1969 Chevrolet Camaro models. This bracket is manufactured in stamped steel to exact factory specifications, ensuring a precise fit and factory-original...
1960-66 Chevrolet, GMC Pickup; License Plate Bracket; Rear; with License Lamp Assembly
Reproduction of the original rear license plate bracket and license lamp assembly for 1960-66 Chevrolet and GMC truck models. Each license bracket is manufactured to replicate the original design and replaces the original...
License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear
Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...
Reproduction rear license plate mounting bracket and chrome center bumper filler bar for 1964-65 Chevelle, Malibu, and El Camino models. Manufactured to factory specifications, includes the steel rear license plate mounting...
1965 Impala, Bel Air, Biscayne; Rear License Plate Lamp Bracket Panel; EDP Coated
Reproduction of the original rear license plate mounting bracket designed for use on 1965 Chevrolet Impala, Bel Air and Biscayne models. Each panel is manufactured in stamped steel to original factory specifications featuring...
1968-70 Buick/Oldsmobile License Plate Holder Bracket
Reproduction license plate holder bracket to fit a variety of Buick and Oldsmobile models. Stamped steel with tension springs as original. Buick Applications: 1968-70 Skylark and GS models Oldsmobile Applications: 1968-70...
License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...
License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)
Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...
1971-72 Pontiac GTO, LeMans Sport W/Endura Front Nose; Front License Plate Bracket
Replacement front license plate bracket for Pontiac GTO and LeMans Sport with Endura front nose. This is a factory OEM replacement bracket. Sold individually. {specs} {fitment}
1947-53 Chevrolet, GMC Pickup, Suburban; Front License Plate Bracket; Chrome
Reproduction of the original front license plate bracket designed for us on all 1947-53 Chevrolet and GMC truck models. Manufactured in stamped steel featuring a polished chrome plated finish. Replace the old or worn out...
1966-1977 Ford Bronco; License Plate Bracket, Black
Reproduction stamped steel license plate bracket for 1966-77 Bronco models. These brackets often get bent or lost over time. Bracket attaches on the lefthand side of the vehicle in the recessed area of the tailgate. The...
1964-65 Chevelle, El Camino, Malibu; Front License Plate Bracket
Reproduction license plate bracket for 1964-65 Chevelle, El Camino, and Malibu models. This bracket mounts to the front bumper and the license plate is mounted to it. Manufactured in stamped steel to factory specifications...
1981-1987 Buick Regal; Front License Plate Bracket; Black
Reproduction front bumper license plate bracket for 1981-1987 Buick Regal, Grand National, Type T, GNX, and Limited models. Each bracket is manufactured to correct factory specifications for an authentic appearance and...
1969-70 Mustang; Front License Plate Mounting Bracket
Reproduction of the original front license plate mounting bracket for mounting a license plate on the front valance of your 1969-70 Mustang or 1969 Cougar. It is produced in stamped steel for longevity and strength. Can be...
1947-53 Chevrolet, GMC Pickup, Suburban; Front License Plate Bracket; Black
Reproduction of the original front license plate bracket designed for us on all 1947-53 Chevrolet and GMC truck models. Manufactured in stamped steel featuring black EDP coating. Replace the old or worn out original with this...
1988-2002 Chevrolet, GMC Truck; Front License Plate Bracket; with Bumper Impact Strip Provision
Reproduction front license plate bracket for 1988-2002 Chevrolet and GMC C/K pickup truck models, and 1992-99 Tahoe/Yukon and Suburban models equipped with bumper impact strip. Each license plate bracket is designed and...
1970-72 Chevrolet Chevelle, El Camino, Monte Carlo; Front License Plate Bracket; GM#3982425
Reproduction of the original front license plate bracket designed for use with 1970-72 Chevrolet Monte Carlo, El Camino and Chevelle models. Each bracket is manufactured in stamped steel to original factory dimensions...
1967-68 Pontiac Firebird; Rear License Plate Bracket Retainer
Rear license plate mounting bracket for 1967-68 Pontiac Firebird models. This is the bracket that the rear license plate bracket mounts to. {specs} {fitment}
1973 Mustang; Front License Plate Bracket; with Urethane Bumper
Reproduction front license plate bracket to mount a license plate to the front valance ON 1973 Mustang models. For use with a urethane bumper. Each bracket is produced in stamped steel as original and finished in EDP coating....
License Plate Mounting Kit; Features Slotted Round Washer Head Screws; (4 Screws, 4 Nuts)
This license plate mounting set comes with four plastic nuts and four screws, which is enough to mount one license plate. These are original style nuts and screws, and they'll make sure your license plate stays securely...
1962-65 Chevy II, Nova; License Plate Bumpers; Set of 4
Reproduction of the original rubber license plate bumpers originally installed on 1962-65 Chevy II and Nova models. This bumper will keep the license plate bracket from making contact with the rear body panel possibly causing...
1984-92 Camaro; Rear Tail Lamp & License Bracket Rubber Bumper; Each
OER® reproduction of the license plate rubber bumper designed for use with 1984-92 Camaro models as listed. Each bumper is manufactured from quality EPDM rubber replicating the original in design. Replaces the old or worn...
Reproduction license plate / fuel door stoppers for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note: REV. 5-80 (cut 1/4"...
1966-74 License Plate Screw And Nut Set ; Chrysler, Dodge, Plymouth
Reproduction license plate screw and nut set for 1966-74 Mopar models. Includes two screws and two retaining nuts to install the license plate. Nylon Nut Specifications: Head Style : Square For 1/2" Hole Screw Size : 1/4...
1954-59 Chevy, GMC Pickup Truck; Rear License Plate Bracket; with Lamp & Wiring
Reproduction of the rear license plate bracket and lamp assembly designed for use with 1954-59 Chevrolet and GMC pickup trucks. Each bracket is manufactured in stamped steel replicating the original factory bracket with lamp...